Welcome to our Trade & Partner page for the bulk (pallet load) purhcase of product. Below we outline the benefits and use of the 2-8mm sieved biochar granules.
Biochar is used to improve crop and plant growth. Add biochar to soil and compost to improve:
- Water retention
- Nutrient supply to root
- Decrease nutrient run of
- Support microbes and AMF (mycorrhizal fungi)
- Support the formation and stability of colloidal humus
- Improve soil tilth
Read more at our biochar article
- 16 litres tubs, 54 tubs per pallet
- 35 litre sacks, 30 sacks per pallet
Environmental benefits include:
- Carbon capture by locking carbon in soil for hundreds of years – offsetting your carbon foot print
- Reduced NOx and methane soil emissions
Where to use biochar
- Raised beds
- General gardens
- Add to compost* (see below)
How to apply biochar
The most powerful biochar benefits involve interactions with the root zone. It follows, the best place for biochar is in the root zone. Our recommendation is to dig it when planting (eg seed drills, tree holes or when cultivating soil. This is not always possible (nor desirable if following no-till regime!) and biochar benefits have been shown when used as a top dressing or when lightly hoed into top few cm soil.
We recommend (along with most of the biochar scientific community) that you 'inoculate' (soak, charge, activate, enrich) your biochar before adding it to soil. The simplest method is to add biochar to your composting process. However, if you prefer to buy a 'ready-made' activated biochar - please see our SF60 product page.
How much biochar should I apply to soil?
The range is 0.5-5 Kg/m2 (5-50 t/ha), around 1-10% by volume. Heavy clay soils tend to benefit from higher application rates.
Annual plants – biochar should be sprinkled onto the beds/containers then hoed in to ensure all char is fully mixed with your soil/compost.
Perennial plants – 500g of char should be sprinkled into the planting hole alongside a mycorrhizal inoculant (eg Root Grow) before backfilling the hole with soil.
Our biochar is made in the UK using wood from managed coppice woodland here in the North East of England. We supplement this wood with occasional deliveries of wood from tree surgeons (arboricultural arisings).
Our biochar has been tested according to the British Biochar Foundation (BBF) Quality Mandate and we are currently submitting approval paperwork. The UK BBF-QM is similar to the European Biochar Certificate.
|How to use / Specification|
|How to use||Mix 5-10% by volume into raised beds, containers and around plants to improve crop and plant growth. Please note all biochar should be activated before use - for more read our biochar and SF60 FAQs|
|Pack size||16 litre tubs, 35 litre sacks by pallet load. Contact us for 1m3 bulk dumpy bags.|
|Particle size||2-8 mm, 100% passes through 8 mm mesh sieve. 100% retained on 2 mm sieve mesh.|
|Weight||Weight varies depending on moisture content 16 litre tub approx 8.0 - 9.6 Kg 35 litres sacks approx 15 - 18 Kg|